Audio Equalizer 10 Band
Home» Audio» Audio Equalizer 10 Band
Advertisement
Audio Equalizer 10 Band Schematic
This circuit allows you to equlize the audio signals in ten band. It uses low amount op-amps to anatomy a able blaster circuit. The affection of the architecture is a classical band-pass alive filter. The U11 acts as an attenuator to adapt the arresting akin for equlizing. The U13 acts as a final voltage amplifier to bear the equlized audio signals to the abutting stage. The VCC is in ambit of +12 ~ +15 VDC and The VDD is in ambit of -12 ~ -15 VDC respectively.
Related Posts
Double Side Band AM Transmitter CircuitThe circuit of AM transmitter is designed to transmit (amplitude modulated) DSB (double side band) signals. A modulated AM signal consists of a carrier and ...
Skema Rangkaian Active Crossover CircuitSkema Rangkaian Active Crossover Circuit This alive Cantankerous over is adequately beeline forward. It consists of a absorber and two 3rd order, 18 dB per ...
Rangkaian Pengatur Volume Audio Otomatisautomatic audio volume control schematic This circuit is used as a series of automatic audio volume control. Audio levels will be in the drive by ...
88-108 MHz FM Beacon Broadcast Transmitter Circuit88-108 MHz FM Beacon Broadcast Transmitter Circuit This circuit will transmit a continuous audio tone on the FM broadcast band (88-108 MHz) which could used ...
Loudness Control Automatic Schematic CircuitIn order to obtain a good audio reproduction at different listening levels, a different tone-controls setting should be necessary to suit the well known behaviour ...
