Infrared Gate Sensor

Home» Detector, Sensor» Infrared Gate Sensor

Circuit is Infrared gate sensor. It’s an infrared gate with two sensors planned to use in the wall in the way behind a door. It can be applied in a toilet to keep track of that someone is inside exceeding a certain amount of time. After that time elapsed, the circuit triggers the digital output wich can turn on a ventillator. The time period the output is turned on can be separately controlled by a second timer.

If you plan to build this gate sensor circuit, beware that you may have lots of difficulties though the schematic may seem simple. The construction of the circuit requires some amount of equipment like an oscilloscope and a DVM, too. Without them, the device will do weird things you wouldn’t expect, and even if it is correctly put together, you must adjust it with care both mechanically in its final place and electronically with the help of an oscilloscope. Only if you want to span about less than 20-30 inches with the infra diodes can forget about this calibration. Alternatively you can take ideas from this construction.

Source: Infrared Gate Sensor
See More : Audio Detector Circuit

Infrared Light Photo-Detector Circuit

This is a basic infrared light photo detector circuit. In this circuit the light falling on the phototransistor will be from an Infrared Light Emitting ...

CD4001 Simple Alarm Circuit For Motorcycle

Simple Alarm for motorcycle with a CD4001 This is a simple alarm circuit for a check with a 4001. You can use it to protect ...

Radios Clock Time Signals

Radio Clock listens to radio time signals from your radio and corrects the time on your PC clock. Radio Clock enables you to decode the ...

Simple Metal Detector

It's a simple metal detector design that has the quite good characteristics. the principle of operation which one differs from the classic schemes (BFO, transmit-receive ...