Tag: Schematic

10 W Bass-boost Audio Amplifier

18 December, 2009 (08:40) | audio | By:

10 W Bass-boost Audio Amplifier Schematic
Description:
This architecture is based on the 18 Watt Audio Amplifier, and was developed mainly to amuse the requests of correspondents clumsy to locate the TLE2141C chip. It uses the boundless NE5532 Dual IC but, obviously, its ability achievement will be comprised in the 9.5 – 11.5W range, as the accumulation [...]

Loudness Control Automatic Schematic Circuit

7 September, 2009 (13:11) | Loudness | By:

In order to obtain a good audio reproduction at different listening levels, a different tone-controls setting should be necessary to suit the well known behaviour of the human ear. In fact, the human ear sensitivity varies in a non-linear manner through the entire audible frequency band, as shown by Fletcher-Munson curves.
A simple approach to this [...]

Car Subwoofer Amplifier Driver Schematic Circuit

7 September, 2009 (13:01) | Subwoofer | By:

The stereo signals coming from the line outputs of the car radio amplifier are mixed at the input and, after the Level Control, the signal enters the buffer IC1A and can be phase reversed by means of SW1. This control can be useful to allow the subwoofer to be in phase with the loudspeakers of [...]